How to Replace or Install Ink Cartridges in HP Printer

When your ink cartridge runs out, you will have to think about replacing the existing one with a new one. It is a cost effective solution that spending your money in order to purchase a new printer. Here is a list of steps, which you need to follow in order to replace or Install Ink Cartridges in your HP printer.

  • First of all, you will have to note down the model number of your HP Printer in a piece of paper. Different HP printers are provided with different types of cartridges. As a result, you will need to be careful enough to purchase the ideal cartridge for the printer you have.
  • Secondly, you should open the flap of your HP printer, which encloses the ink cartridges. Then cartridges would usually be at the center of printing space. If you press on the ink button, the ink cartridges would slide out.
  • You will then have to take a note about the type and number of cartridges. You can also find this information from the HP website if you have serial number of you printer which is located at the back side of the printer. If you find it difficult to get the right cartridge for your printer, contact HP Printer Support Phone Number for assistance to get the right cartridge delivered at your doorstep.

Install Ink Cartridges

  • When replacing the cartridges of your HP printer, you are provided with two main options to consider about. Either you can refill the existing cartridges, or else you can purchase new ones. If you are purchasing new cartridges, the numbers you noted down would help you. However, you need to be careful enough to purchase the cartridges from the right manufacturer. Otherwise, you will not be able to use your printer after installing the replacements.
  • Once you get hold of the new HP cartridges, or refill the existing ones, you can gently remove the cartridges, which need to be replaced.
  • By holding the new cartridge in its packing, you should shake well before you install. This will assist you to make the first print job come out with a better look. In addition, shaking will assist you to make sure that the cartridge is not leaking.
  • In the new cartridge, you will be able to find a cover that offers protection to the ink dispenser. You will have to remove it carefully. Usually, this would be a plastic cover or a protective sticker. It is extremely important to remove this sticker before you install the new cartridges on your HP computer.
  • Next you will have to insert your ink cartridges into the printer. You will need to be careful enough to Install Ink Cartridges in a reverse way. In addition, you will have to hold them in the right angle. With a little effort, you will be able to place them at the right position. You will be able to feel the locking of your new ink cartridge as well.
  • Now you have successfully replaced the ink cartridge of your HP printer. You should then check whether the newly installed cartridge is working properly or not. That’s where you will have to think about printing a test page. If you follow the above mentioned steps right, the test page would come out well.

Hope these instructions are good enough to help you to Install Ink Cartridges in your loved HP Printer. If you have anything to add in this article, kindly let us know in comment section.

0 votes